Epoxy Bonding Agents

Nitobond EP is based on solvent-free epoxy resins containing pigments  and  fine  fillers.  It  is  supplied  as  a  two-component material in pre-weighed quantities ready for on-site mixing and use. The base component is white and the hardener component is green, providing visual evidence that adequate mixinghasbeenachieved.(Nitobond  EPFS,  suitable  for  cold  weather  working,  can  be made available when specifically requested.

Uses For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.

Advantages Nitobond EP may also be used as part of a repair system where a substrate/repair barrier is required or where the substrate is likely to remain permanently damp or wet. ?? Can be applied on to dry or damp substrates ?? Exhibits high mechanical strength ?? Positive adhesion - exceeds that of the tensile strength of the host concrete ?? Slow cure allows time to erect steel reinforcement and formwork ?? Solvent-free - can be used in enclosed locations

Nitobond  SBR  is  a  modified  styrene  butadiene  rubber  emulsion which is supplied as a ready to use white liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries. Being resistant to hydrolysis, it is ideal for internal and external applications in conjunction with cement.

Use:
For improving and bonding concrete repair mortars, floor toppings and screeds, waterproof renders and cementitious slurries. Mortars and bonding slurries produced with Nitobond SBR may be used for horizontal, vertical and overhead repair work  and  are  suitable  for  permanent  immersion.  Nitobond  SBR  may  be  used  to  form  a  bonding  agent  for  slip  bricks,  ceramic tiles, etc

Advantages

• Single component liquid can be easily gauged as required
• Improves cohesion and workability
• Improves mortars to provide waterproof repairs, renders and  toppings  which  are  highly  resistant  to  freeze/thaw  cycling
• Improved  tensile  and  flexural  properties  allow  thin  applications
• Excellent bond to concrete, masonry, stonework, plaster and blockwork
• Contains no chloride admixtures
• Can be applied to damp substrates

DescriptionNitobond SBR is a modified styrene butadiene rubberemulsion which is supplied as a ready to use white liquid. It isdesigned to improve the qualities of site-batched cementitiousmortars and slurries. Being resistant to hydrolysis, it is ideal forinternal and external applications in conjunction with cement.

Use:
For improving and bonding concrete repair mortars, floortoppings and screeds, waterproof renders and cementitiousslurries. Mortars and bonding slurries produced with NitobondSBR may be used for horizontal, vertical and overhead repairwork and are suitable for permanent immersion. NitobondSBR may be used to form a bonding agent for slip bricks,ceramic tiles, etc.

Advantages

Single component liquid can be easily gauged as required

Improves cohesion and workability

Improves mortars to provide waterproof repairs, renders and toppings which are highly resistant to freeze/thaw cycling

Improved tensile and flexural properties allow thin applications

Excellent bond to concrete, masonry, stonework, plaster and blockwork

Contains no chloride admixtures

Can be applied to damp substrates